uCamIII Serial Camera Module

6,400.00

Specification :-

  • Supply Voltage (VCC) : 5V
  • Image Sensor : 1/4” CMOS, 300K pixels 
  • Pixel Size : 5.55um x 5.55um 
  • White Balance: Automatic 
  • Effective Pixel Array: 656 x 496  
  • Focal Length : 3.1mm 
  • Lens viewing angle (3 options) : 56 degrees, 76 degrees, 116 degrees (3 different lens options as accessories) 
  • Operating Ambient Temp : -30  to 85 deg C
  • Storage Temperature : -40 to 105 deg C

Applications:-

Robotics, DIY Kit and Projects, Arduino Projects, Machine Vision

SKU: M-CA-UCA-III Category: Tags: , , ,

The uCAM-III (microCAM-III) is a highly integrated serial camera module which can be attached to any host system that requires a video camera or a JPEG compressed still camera for embedded imaging applications. The module uses a CMOS VGA colour sensor along with a JPEG compression chip that provides a low cost and low powered camera system. The module has an on-board serial interface (TTL) that is suitable for a direct connection to any host micro-controller UART or a PC system COM port. 

The uCAM-III is capable of outputting both RAW format and JPEG format images. 

There are 3 lenses available for this camera from 4D Systems. A 56 degree (Standard), a 76 degree, and a 116 degree. These are available to purchase from 4D Systems separately if required. The uCAM-III ships with the 56 degree lens installed. 

In the Box: 

1 x uCamIII Serial Camera Module (Camer Only)

Reviews

There are no reviews yet.

Be the first to review “uCamIII Serial Camera Module”

Your email address will not be published. Required fields are marked *